Repair Guide: DeLorean DMC-12 - Gullwing Door Failure

Repair Guide: DeLorean DMC-12 - Gullwing Door Failure

Repair Guide: DeLorean DMC-12 - Gullwing Door Failure

The DeLorean DMC-12, notorious for its gullwing doors, is prone to door failure, which can be a daunting mechanic problem to fix. This detailed guide will walk you through the steps and tools needed to troubleshoot and rectify this problem.

Tools Needed:

Steps:

1. Inspect Door and Perform Initial Tests

Open and close the door several times to better understand the nature of the problem. Observe any abnormalities in the movements of the door.

2. Remove Door Panel

Remove all screws holding the door panel in place using the Phillips Screwdriver. Ensure to store these screws safely as you will need to reassemble the panel later. Once the screws are removed, detach the door panel from the door carefully.

3. Check the Door Struts

Inspect the door struts for any irregularities. If the door struts appear worn or faulty, it is likely causing the door failure. Replace them if necessary.

4. Check Torsion Bar

Check the torsion bar for any visible issues and ensure that it is correctly seated. If it is not, correct the alignment with the torque wrench.

5. Test Door Once More

Attempt to open and close the door again to see if the defect has been rectified. If not, seek professional help as more complicated mechanisms could be at fault.

6. Reassemble Door Panel

Replace the door panel and carefully reinsert the screws with the Phillips Screwdriver.

Please proceed with these steps with caution. It is advised to seek professional help when necessary. Fixing faulty gullwing doors may seem intimidating, but with the correct tools and steps, it can be accomplished. Drive safely!